FBE Coating Pipe ye

Fusion Bonded Epoxy (FBE) coating ye kɛnɛma lakanani fɛɛrɛ ye min bɛ baara kɛ kosɛbɛ, min bɛ kɛ kosɛbɛ petoroli & gazi, ji, ani fɛnsɔrɔko siratigɛ la. Ni a bɛ kɛ i n’a fɔ mugu dacogo kelen-la, FBE bɛ siri ni nɛgɛdaga ye k’a ɲɛsin a ma, ka kɛ barikalan ye min ka bon, min bɛ to senna, ani min bɛ se ka sɔgɔsɔgɔ-. A ka ca a la, a bɛ kɛ a yɛrɛ tangalan ye walima i n’a fɔ daminɛfɛn multi-layer systems (3LPE/3LPP).

• ISO 21809-2 ye– izini-ye FBE kɛ ka ɲɛsin pibilikiw suturalenw ma walima minnu bɛ ji la
• AWWA C213 ye– FBE dacogo jibolisiraw kama
• CSA Z245.20 ye– Fusion-bonded epoxy ka ɲɛsin nɛgɛ pibiliki ma
• NACE SP0102 ye– Baarakɛcogo ni sɛgɛsɛgɛli kɛcogo

Pipe Range: 1. Bamako, Mali.Baarakɛminɛnw, ERW, LSAW, SSAW

OD: 1 .1⁄2′′ – 48′′ (laada la fo ka se 60′′ ma)

Coating Thickness: 1. Bamako, Mali.250 – 500 μm

Baarakɛcogo funteni:-30 degere ka se +95 degere ma

• Surface Labɛnni– Abrasive blasting ka Sa 21⁄2, anchor profile 50–100 μm
• So funteni– Induction walima foro sumaya fo ka se degere 200–250 ma
• Mugu (Mugu) kɛli– Epoyi mugu fiyɛli ni kuran ye
• Fusion & Curing (Kɛnɛya) ye– Epoyi bɛ wuli, ka ɲɔgɔndan kɛ, ka siri nɛgɛ la kemikɛli fɛ
• Nɛnɛ & Sɛgɛsɛgɛli– Nɛnɛ kɔlɔsili, a bonya sɛgɛsɛgɛli, seli sɛgɛsɛgɛli

• Adhesion & Bonding fanga danfaralenFBE bɛ ɲɔgɔn sɔrɔ kemikaliya la ni nɛgɛdaga ye, ka jɛɲɔgɔnya sabatilen dɔ dilan min bɛ delamination bali, hali ni dugukolo degun walima funteni jiginni.
• Katoliki Lakanali BɛnkanCathodic disbondment resistance outstanding, ka a to baara kuntaalajan-la CP systems kɔnɔ yɔrɔ minnu na coating tiɲɛni bɛ se ka corrosion teliya n’o tɛ.
• Corrosion & Resistance kemikali yeEpoyi matirili dense bɛ ji, oksizɛni, kuloridi ani furakisɛ suguya caman kɛlɛ, o b’a to a bɛnnen don sigida kɛnɛw ni kɔgɔlenw bɛɛ ma.
• Mekaniki & Impact ResistanceHali n’a ye fɛn finman ye, FBE bɛ sɛgɛsɛgɛli ɲuman jira, a bɛ se ka sɔgɔsɔgɔ, ani a bɛ se ka bolifɛnw ni u minɛcogo degunw muɲu.
• Lamini & Lakanali Nafaw100% solide, solvent-mugu tɛ min na; VOC bɔli dɔgɔyali; baara kɛra ni otomatiki baarakɛcogo saniyalen ye, o bɛ dɛmɛ don sabatili la.
• Fɛn caman kɛcogoA bɛ tali kɛ pibiliki tilennenw na, kurulenw, fɛnw dondaw, ani foro jogindaw la; bɛ se ka kɛ finimugu jɔlen ye walima daminɛ ye 3LPE/3LPP multilayer systems kama.

• A janya: 250–500 μm
• Nɔrɔli fanga ka bon walima a bɛ bɛn 9 MPa ma
• Cathodic disbondment A ka dɔgɔn walima a bɛ bɛn milimɛtɛrɛ 12 ma (degɛrɛ 65 , tile 28) .
• Ji funteni kunbɛncogo: A bɛ baara kɛ ka ɲɛ ni degere 65 ye
• Impact resistance: >3 J/mm ye

• Petoroli & gazi pibilikiw janya-janya
• Jibolisiraw (minisipali, izini) .
• Foro jogindaw, kurulenw, fitiniw
• Nɛgɛ pibilikiw suturalenw ni ji la
• Primer basigilen ka 3LPE/3LPP multilayer coating

• Fɛnɲɛnɛmafagalanw (Coating Facilities) minnu ka bon kosɛbɛOtomatiki dafalenw dacogo siraw ni kuran fiyɛlanw, induction heating, ani precision curing control bɛ a to jogo bɛ kɛ cogo kelen na hakɛ caman kɔnɔ.
• Jogoɲumanya sabatili gɛlɛnQA/QC porogaramu bɛɛ lajɛlen min kɔnɔ, a janya kariti, seliw dɔnni, adhesion & peel sɛgɛsɛgɛli, jisuma soak, ani cathodic disbondment testing per ISO ani AWWA.
• Sariyaw labatoliFɛn minnu bɛɛ sɛgɛsɛgɛra ISO 21809-2, AWWA C213, CSA Z245.20, ni tugu-tugu-ɲɔgɔn kɔ dafalen ye EN 10204 3.1/3.2 sɛgɛsɛgɛli seereyaw fɛ.
• Duniya Porozɛw ka ko kɛlenwTrack record sɛgɛsɛgɛlen don ka ɲɛsin petoroli & gazi baarakɛlaw ma, jiko porozɛw ma, ani kɔgɔjida la baarakɛlaw ma, minnu bɛ se ka kiliyanw ka fɛn ɲɛfɔlenw dafa minnu ka gɛlɛn kosɛbɛ.
• Flexible Fourniture & LivraisonK’a ta pibiliki misɛnninw na minnu tɛ sɔgɔsɔgɔ, ka se LSAW belebelebaw ma minnu janya ye-, Octal Pipe bɛ fɛnw lase teliya la, ka tigɛcogo labɛn ka kɛɲɛ ni mɔgɔw sago ye, ani ka pake barikamaw dilan diɲɛ kɔnɔ.
• Nafa-Sɛbɛnni minnu bɛ fara a kanƐntɛrinɛti dɛmɛni ka ɲɛsin finiko sugandili ma, fɛɛrɛko ladilikanw, ani fɛnw dilancogo jɛli ni 3LPE/3LPP sitɛmuw ni katodi lakanani furaw ye.

• Sisitɛmu:Fusion Bonded Epoxy (yɔrɔ kelen-layer) .
• Sariya minnu bɛ kɛ:ISO 21809-2, AWWA C213, CSA Z245.20
• Pipe Range: 1. Bamako, Mali.1⁄2′′ – 48′′ (a bɛ se ka kɛ 60′′ ye ni ɲinini kɛra)
• Coating Thickness: 1. Bamako, Mali. 250 – 500 μm
• Baarakɛcogo Temp:-30 degere ka se +95 degere ma
• Baarakɛcogo:Tulu & gazi, jibolisiraw, foro jogindaw, primer for 3LPE/3LPP

Sɛbɛnw (certifications) minnu bɛ sɔrɔ

 

CE ka Seereyaw

ISO 9001 ka seereyaw

API Q1 Seereyaw

ABS ka Seereyaw

AP-5L ka seereyaw

API-5CT ka seereyaw

 

Tags hot .: fbe coating pipe, China fbe coating pipe dilannikɛlaw, feerekɛlaw, izini